Homeowners need to know that together with planning and patience and skill, they ought to have specialized equipment as well when considering hardwood floor and kitchen cabinet refinishing. Out of all the projects for home improvement that any homeowners can take, this is something that needs research, knowledge and time. You'll be going through a series of steps or stages that include preparing, evaluating, sanding as well as sealing your hardwood floors. Check out http://edspaintingandremodeling.com/#!hardwood-floor-refinishing to get started.

In any of the said steps or stages, just a slight touch of error is more than enough to lead to problems that may last for long. Yes, you could refinish the entire hardwood flooring on your own but, it is recommended that you get some help at some stages. It takes 1 to 3 weeks to carry out refinishing for such type of flooring.

Step 1. Checking the hardwood floor - it is important to figure out first if the hardwood floor planks are going to be a laborious process. It is essential to assess the floor if it has suffered from water, pet urine or spills. In an effort to see if the boards are very thin to be sanded, you can pull up one threshold of the door. Additionally, you need to figure out if the last sealant was varnish, wax or polyurethane. You have to examine the hardwood flooring to be able to see if they have deep gouges or dramatic wear patters.

Step 2. Preparing the flooring - you must prepare the flooring first before you do hardwood floor refinishing. If most of the hardwood planks don't have scratches or holes, are at least 3/4 inches thick and have same amount of sealant, then you're all set to start with the preparation.

First thing that you've got to do is clean the whole floor area. You need to file any holes from nails, staples or scrapes. You should pull up the thresholds and the baseboards too. You need to do all the floors to keep it consistent even if one of the floors not looks good.

Step 3. Sanding - without a doubt, this step is the most demanding and the most daunting that you would do. You will be renting drum sander equipment, which is quite loud to use and, you need to roll it onto the entire hardwood flooring 3x to be able to peel off the top layer of the finish.

Step 4. Staining and sealing - before you get started on this step, you have to be sure that every single bit of sawdust is gone so it doesn't contaminate the sealing and staining applications. You need to seal it with thin layer of sealant to be certain that the stain is dry before application once you are done staining the flooring.